TM 10-4510-207-14
4.14. REGULATOR ASSEMBLY (TEMPREATURE) REPAIR OR REPLACEMENT. CONTINUED
(4) Apply sealing compound to threaded end (s) of nipple (13) and coupling (1) then install nipple, elbow (12),
and coupling. Be sure elbow is installed as illustrated.
(5) Apply sealing compound to threaded end (s) of elbow (11), nipple (10), and bushing (3) then install elbow,
nipple, and bushing. Be sure elbow is installed as illustrated.
e. Installation.
(1) Install bracket (8) and regulator (9) assembly the secure using two U-bolts (7), four flat washers (6), new
locking washers (5), and new self-locking nuts (4). Be sure regulator assembly is installed as illustrated.
(2) Install cold line assembly onto bushing (3). See paragraph 4.12.
(3) Connect mating hose end coupling to coupling (2) and secure coupling.
(4) Connect mating hose end coupling to coupling (1) and secure coupling.
(5) Start up the shower facility. See paragraph 2.7.
4-34
