TM 10-4510-208-13&P
0018 00
Table 1. Water Troubleshooting Procedures-Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. NO WATER AT
Step 1. Press showerhead
If showerhead cutoff is damaged
SHOWERHEAD
cutoff.
or difficult to move, replace the
showerhead with a new one.
Showerhead should be hand
tight.
Step 2. Inspect showerhead for
Clean any obstructions or replace
damage or clogged opening.
a damaged showerhead.
If showerhead is damaged or
difficult to remove, replace the
showerhead with a new one.
Showerhead should be hand
tight.
Step 3. Inspect shower valve for
Turn hot and cold water shutoff
proper operation.
valves to OFF position, and
remove shower head. Turn
shower valve ON. Turn hot and
cold water shutoff valves ON.
Perform troubleshooting
Step 4. Perform troubleshooting
procedures (malfunction) 1 and 2
procedures (malfunction) 1 and 2
described in WP 0018 00.
described in WP 0018 00.
If condition persists, notify unit
maintenance.
Shower Head
Hot and Cold Water
Shutoff Valves
(shown OFF)
Shower Head
Cutoff
Shower Valve
0018 00-9/(10 Blank)
