TM 10-8400-203-23
1-6. ITEM CLASSIFICATION CRITERIA–Continued
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(I)
(m)
(n)
Buttons. Replacement buttons visible on outer garments when worn should be of a size, shape, and
color like those originally affixed. Buttons which are not visible when a garment is being worn need not
be specifically of the same color but should be of the same size.
Buttonholes. Buttonholes should not be enlarged or ripped.
Frayed Edges. No edge should appear ragged due to worn or broken threads.
Linings. Linings in all outer garments must be in a complete state of repair. Repair may include minor
patches. The patch does not have to exactly match the color of the lining, but should be reasonably
similar in color.
Patches and darns. Patches and darns should not be visible on outer dress clothing when worn.
Pockets. Pockets must be clean and in a complete state of repair. Any repairs will be of a wear
expectancy similar to that of the remainder of the garment. Replaced pockets must be of a size
consistent with those originally in garment.
Belt loops. All belt loops on trousers will be the same as on any new garment of a like make, including
shade, material, and number.
Fading, Except for those items designed as work-type garments, there should be no obvious fading.
NOTE
Fading which does not cause conspicuous deviation from original shade will be
permitted for work-type garments.
Insignia marks. Chevron, overseas service organizational shoulder, or other insignia marks, caused by
fading or discoloration, will prohibit serviceable classification. Insignia marks which are not conspicuous
will be permitted on work-type garments.
Identification marks. Marks of identification include those made at issue point and those made by
individuals. These should be lined out or obliterated. A mark is considered obliterated when its
cancellation is readily evident.
Spots and stains. Spots and stains should not be easily discernible at a casual glance when the garment
is being worn.
Hardware. Hardware will not be bent, broken, or missing. Bright and shiny hardware will not disqualify
items from a serviceable classification.
(3) Items of organizational clothing and equipment will require the following for classification in serviceable
condition codes (A or B):
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(I)
Complete state of repair. See (2)(a) above.
Cleaned. Must be in a clean (laundered, dry cleaned, sterilized, or painted) condition.
Buttons. See (2)(c) above.
Fasteners. All present and of the same size originally affixed to item.
Buttonholes. See (2)(d) above.
Frayed edges. Frayed edges of an inconspicuous or minor nature will be permitted.
Linings. See (2)(f) above.
Patches and darns. Patches and darns will be permitted, provided their color is similar to that of the
original material.
Pockets. See (2)(h) above.
Belt loops. See (2)(i) above.
Fading. Fading will be permitted.
Identifying marks. See (2)(1) above.
(m) Spots or stains.
1. Items worn by individuals. Small paint, grease, or other spots or stains will be permitted if garment
or other item is otherwise completely serviceable.
2. All other organizational items. Spots and stains will not be considered a determining factor in
classifying this category of property if such spots and stains are of a minor nature.
1-3
