MODEL 200-AO
INTRODUCTION
The MODEL 200-AO Skid Mounted Pressure Jet Steam Cleaner is fully enclosed
cleaner mounted on a frame supported by skids equipped with lifting and tow-
ing rungs. The cleaner is designed to heat a predetermined quantity of water
with or without a selectable amount of detergent to a certain temperature
each hour. The cleaner will operate as a cold water rinse unit or as a
steam cleaner at the rate of 200 gallons per hour. This unit is designed
for the steam cleaning and decontamination of vehicles and miscellaneous
ground equipment by the application of steam vapor with suitable detergents
and cold water rinse at a designed operating pressure of 80 to 100 P.S.I.
ACCESSORIES FURNISHED
1 - 1/2" I.D. X 25' STEAM HOSE COUPLED
1 - 1/2" I.D. X 50' STEAM HOSE COUPLED
1 - 3/4" I.D. X 50' WATER SUPPLY HOSE WITH FITTINGS
1-
1 - 75' x 3 CONDUCTOR ELECTRIC POWER CORD, LESS CONNECTOR
1 - CLEANING GUN COMPLETE WITH NOZZLE CONTROL VALVE
1 - ROUND HI-IMPACT STEAM NOZZLE
1 - 2" FLAT FAN STEAM NOZZLE
1 - 4" FLAT FAN STEAM NOZZLE
1 - PRESSURE RINSE NOZZLE
2 - OPERATOR AND MAINTENANCE INSTRUCTION MANUAL WITH COMPLETE
PARTS LIST.
ADDITIONAL COPIES OF THIS PUBLICATION MAY BE OBTAINED
THROUGH
NORMAL DA DISTRIBUTION CHANNEL FROM THIS ADDRESS:
COMMANDER
US ARMY PUBLICATION CENTER
1655 WOODSON ROAD
ST. LOUIS, MO. 63114
-i-
