OPERATION PROCEDURE
FIGURE III
MODEL 200-AO
CAUTION
The Electric Motor, item 41, is
equipped with an automatic overload
If tripped it
will reset automatically when motor
protector switch.
cools, causing motor to restart
without warning.
In case
overload protector switch is tripped, turn off pump Switch,
Check for cause of problem, motor
item 6, and Burner Switch, item 5.
to pump belt too tight, low or improper electrical voltage, lOSS o f
Allow five (5)
water pump crankcase oil (bearing seizure), etc.
minutes for motor to cool before restarting.
