MODEL 200-AO
WARNINGS
This equipment can be hazardous to the operator's safety and only authorized
personnel who have read and understand the installation and operating manual
should be permitted to operate this unit. DO NOT ALLOW THIS EQUIPMENT TO
OPERATE UNATTENDED.
DO NOT use gasoline, solvent or improper rated fuels in this equipment and
only fill fuel tank when unit is in off condition, main power disconnected
and all components are cool. FAILURE TO DO SO COULD RESULT IN SEVERE OR
POSSIBLE FATAL INJURY TO PERSONNEL.
Install and operate this unit ONLY in areas where open flame type of equip-
ment is permitted, such as, acetylene or electric welders, FAILURE TO DO SO
COULD RESULT IN SEVERE OR POSSIBLE FATAL INJURY TO PERSONNEL.
DO NOT install or operate this unit in an enclosed room unless adequate fresh
air and exhaust ventilation is available, This equipment requires intake air
for proper combustion and may draw flammable vapors into combustion chamber
creating an extremely hazardous condition. FAILURE TO DO SO COULD RESULT IN
SEVERE OR POSSIBLE FATAL INJURY TO PERSONNEL.
Acid forming gases such as formed in trichlorethylene vapor degreasers will 11
attack heating coils and should be located away from the unit,
DO NOT operate this equipment unless it is connected to a properly wired and
GROUNDED electrical source per local electrical codes.
This unit may conduct static electricity through the discharge nozzle and
is not designed for cleaning applications using combustible liquids, mater-
ials or flammable gases. TO DO SO COULD RESULT IN SEVERE OR POSSIBLE FATAL
INJURY TO PERSONNEL.
DO NOT use any type of insecticide, toxic chemicals or heat activated chemi-
cals that produce toxic fumes or explosive materials in the soap solution
system of this equipment. Use ONLY those detergents proven safe for human
contact. FAILURE TO DO SO COULD RESULT IN SEVERE OR FATAL INJURY TO PERSONNEL.
DO NOT stand or allow other personnel to stand in front of steam gun nozzle
and avoid contact with hot water discharge. TO DO SO COULD RESULT IN SEVERE
OR POSSIBLE FATAL INJURY.
ALWAYS turn the unit off and disconnect power cord from power source prior
to performing any maintenance. FAILURE TO DO SO COULD RESULT IN SEVERE OR
POSSIBLE FATAL INJURY.
Bleed off all pressure prior to removal of nozzles, hoses, or port sealing
plugs, and NEVER LEAVE UNIT UNATTENDED WHEN IN OPERATION.
