PREPARE TEMPER WITH ISO MODIFIED END SECTION FOR USE.
The assembled TEMPER section is heavy. At least four persons are required to move
the TEMPER section into position. To avoid injuries, ensure personnel are available
before attempting to lift the tent. Personnel in the 5th percentile size group may require
a step aid during this procedure.
The following procedures provide detailed instructions for erecting a TEMPER window section, end section, and ISO
modified end section for use with the CSSL. For repair procedures or more detailed information on the TEMPER, refer
to TM 10-8340-224-13.
1. Close the personnel double doors on the container.
2. Use WP 0002 to identify individual pieces of the TEMPER section. Pay particular attention to the difference
between the modified TEMPER end section (1) and the regular TEMPER end section (2).
3. Assemble the TEMPER section with the ISO modified end section (1) facing towards the container personnel