SB 740-94-8
Gage Assembly shall not leak when subjected to an
period of 60 seconds with the assembly submerged in
internal air pressure of 200 + 10 psig for a period of 60
water up to the bottom of the gage.
seconds when tested as specified.
2. Do not allow water to contact the gage.
(b) Equipment required.
3. Do not exceed a pressurizing rate of 500 psig
1. Regulated air pressure source (250 psig).
per minute.
2. Water tank and water.
4. Observe for leakage.
(c) Procedure.
5. Dry and return serviceable assemblies to
storage.
1. Subject the assembly to an internal air
pressure of 200 + 10 psig for a minimum
D-3
