TM 10-3510-208-12
1. Bolt
2. Lockwasher
3. Storage cylinder box
Figure 4-26. Storage cylinder box, removal and installation.
b. Cleaning.
(2) Replace a damaged storage cylinder box.
d. Installation.
Clean all parts in a well-ventilated area.
(1) Position the storage cylinder box (3, fig.
Avoid inhalation of solvent fumes and
4-26) onto the trailer and secure with lockwashers
prolonged exposure of skin to cleaning
(2) and bolts (l).
solvent. Wash exposed skin thoroughly.
(2) Refer to paragraph 4-19 and install the
Dry cleaning solvent (Fed. Spec. P-D-680)
drain bin.
used to clean parts is potentially dangerous
4-22. Tool BoX
to personnel and property. Do not use near
a. Removal. Remove the nuts (1, fig. 4-27),
open flame or excessive heat. Flash point
lockwashers (2) (from the trailer underside) and
of solvent is 100 to 138F. (38 to 59C. ).
bolts (3) (from the inside of tool box) securing the
Clean the storage cylinder box with cleaning
tool box (4) to the trailer.
solvent, Fed. Spec. P-D-680, and dry thoroughly.
c. Inspection and Replacement.
(1) Inspect the storage cylinder box for
damage.
4-35
