TM 10-3510-208-12
3. Bolt
1. Nut
4. Box
2. Lockwasher
Figure 4-27. Tool box, removal and installation.
used to clean parts is potentially dangerous
b. Cleaning.
to personnel and property. Do not use near
open flame or excessive heat. Flash point
Clean all parts in a well-ventilated area.
of solvent is 100 to 138F. (38 to 59C. ).
Avoid inhalation of solvent fumes and
Clean the tool box with cleaning solvent, Fed.
prolonged exposure of skin to cleaning
Spec. P-D-680, and dry thoroughly.
solvent. Wash exposed skin thoroughly.
c. Inspection and Replacement.
Dry cleaning solvent (Fed. Spec. P-D-680)
4-36
