TM 10-3510-208-12
(2) Remove the conduits (3 and 4).
(2) Replace all worn and/or damaged parts.
(3) Remove the connector elbow (5) and
d. Installation. Refer to Figure 4-52 and install
connector (6).
the exhaust motor and related-parts.
(4) Remove the screws (7) and remove the
4-43. Tumbler Drive Motor Conduit Box and
conduit box (8).
Related Parts
a. Removal.
(1) Remove the screws (1, fig. 4-53) and
remove the conduit box cover (2).
TS 10-3510-208-12/4-53
7. Screw
5. Elbow
3. Conduit
1. Screw
8. Conduit box
6. Connector
4. Conduit
2. Cover
Figure 4-53. Tumbler drive motor conduit box and related parts, removal and installation.
4-69
