TM 10-3510-208-12
TS 10-3510-208-12/4-85
1. screw
7. Switch
12. Lockwasher
17. Lockwasher
2. cover
8. Bolt
13. Separators
18. Plate
3. Hose
9. Lockwaeher
14. Nut
19. Lockwasher
4. screw
10. Plate
15. Lockwasher
20. Nut
11. screw
5. Lockwasher
16. Screw
21. Separator
6. Finger
22. Tube
Figure 4-85. Water level plates and tubes, removal disassembly, reassembly and installation.
b. Cleaning, Clean all parts with dry com-
(3) Install the lockwashers (15) and nuts (14)
Pressed air and a clean cloth.
on the air tubes.
c. Inspection and Repair.
(4) Install the plate separators (19) on the
(1) Inspect all parts for damage.
cover plate and secure with lockwashers (12) and
(2) Repair and/or replace damaged parts as
screws (11).
necessary.
(5) Install the switch mounting plate (10) on
d. Assembly and Installation.
the plate separators and secure with lockwashers
(1) Install the tube separator (21, fig. 4-85),
(9) and bolts (8).
nuts (20) and lockwashers (19) on the water level
(6) Install the water level switches (7) and
air tubes (22) .
switch fingers (6) on the switch mounting plate
and secure with lockwashers (5) and screws (4).
(2) Install the cover plate (18) and secure with
lockwashers (17) and screws (16),
(7) Reconnect the water level hoses (3).
4-120
