TM 10-3510-209-10
2-7. SITE SELECTION, SETUP, AND ASSEMBLY. (CONT)
g.
Make water heater fuel line connections as follows:
WARNING
Use only specified fuel (item 10, app C). Failure to do so may result in death or
serious injury to personnel or damage to equipment.
(1)
Obtain two fuel lines (1, FIG. 2-15).
WARNING
Ensure that fuel lines (1, FIG. 2-15) do not touch or cross water hoses, power
cables, or exhaust ducts. Melting/damage can occur causing leaking fuel and
water or electrical hazards. Death by electrocution, fire, or explosion could result.
(2)
Connect one fuel line (1) to fuel filter inlet (2) and one fuel line to fuel pump outlet (3).
FIGURE 2-13. Dryer bin removal and installation.
Change 1 2-44
