TM 55-1945-205-24-4
2-41. DRYER ASSEMBLY (CONT)
ADJUSTMENT (Cont)
(3)
Tighten two setscrews (44) at the base of each electrode (45).
l.
Install burner base (33) in plenum (43) and secure with three screws (40) and washers (41). Install two conduit
nuts (36) and wire protectors (35).
m.
Connect two electrical wires (37) with nuts (38). Push transformer end of wires into position. Remove tags.
n.
Install burner cover (32) and ground strap (31)
on burner base (33),and secure with six screws (29) and
washers (30). Install cable (27) on UV scanner (28). Install fuel line (25) on nipple (26).
o.
Open the fuel shutoff valve.
2-147
