TM 55-1945-205-24-4
2-41. DRYER ASSEMBLY (CONT)
REPAIR (Cont)
f.
Install pin (70) into center of door hinge (71).
5.
Repair thermostatic high temperature switch.
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance on thermostatic high
temperature switch with power on.
Death or serious injury may result.
NOTE
Repair thermostatic high temperature
switch
by
replacing
the
unserviceable switch with a new one.
a.
Disconnect electrical power from the dryer.
b.
Inspect thermostatic high temperature
switch (21) for damage and loose connections.
c.
Remove sleeve (4), washer (3) and cover
(2) from the thermostatic high temperature switch (21).
d.
Tag and remove two wires (7) from the
thermostatic high temperature switch (21).
e.
Remove the lock nut (6) and the conduit
(5) from the thermostatic high temperature switch (21).
f.
Remove
the
thermostatic
high
temperature switch (21) from the dryer by turning it
counterclockwise.
g.
Install
the
new
thermostatic
high
temperature switch (21) by turning the switch clockwise
into the dryer.
h.
Install the conduit (5) and the lock nut (6)
onto the thermostatic high temperature switch (21).
i.
Connect two wires (7) to the thermostatic
high temperature switch (21).
j.
Replace the cover (2), washer (3) and the
sleeve (4) to the thermostatic high temperature switch (21).
NOTE
FOLLOW-ON MAINTENANCE:
Install tarp assembly (TM 10-3510-209-10).
2-152 Change 1
