TM 55-1945-205-24-4
2-41. DRYER ASSEMBLY (CONT)
REPAIR (Cont)
j.
Install cover (45) on safety switch (46) and secure with four screws (44).
k.
Adjust safety switch (46). Refer to ADJUSTMENT paragraph for adjustment.
2.
Replace thermometer.
WARNING
Serious burns can be caused by
handling hot items. The thermometer
probe extends into the lint exhaust
duct and may be hot.
NOTE
Repair of the thermometer consists
of removal and replacement.
a.
Loosen
locknut
(52)
and
remove
thermometer (53) from exhaust duct (54).
CAUTION
The probe on the gage can be
damaged during installation. Use
care not to overtighten locknut.
b.
Install thermometer (53) into exhaust duct
(54) and secure with locknut (52).
3.
Repair fuel solenoid.
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance with power on. Death
or serious injury may result.
NOTE
Repair of fuel solenoid consists of
removing
the
old
solenoid
and
replacing it with a new one.
a.
Disconnect
electrical
power
from
the
dryer.
2-149
