TM 55-1945-205-24-4
2-42. DRYER BURNER ASSEMBLY (CONT)
REMOVAL (Cont)
WARNING
Allow burner area to cool before any
maintenance actions are performed
on the burner assembly.
3.
Remove UV scanner cable (1) from UV scanner
(2).
4.
Remove six screws (3), washers (4), and
grounding strap (5) from burner cover (6).
5.
Remove burner cover (6), with sight glass (7)
attached, from burner base (8).
6.
Remove two nuts (10) and electrical wires (9)
from base of electrodes (11).
CAUTION
Remove the burner base from the
plenum
carefully
so
that
the
porcelain base and metal tips of the
electrodes are not damaged.
7.
Remove two wire protectors (12) and conduit
nuts (13).
8.
Remove three screws (14), washers (15), and
burner base (8) from plenum (16).
9.
Loosen two setscrews (17) at the base of each
electrode (11).
10.
Remove two electrodes (11) from the burner
base (8).
11.
Remove fuel nozzle (18) from adapter (19).
Change 1 2-153