TM 10-3510-209-24
3-17. EXTRACTOR DRIVE UNIT (CONT)
REMOVAL (Cont)
b.
Disconnect extractor drain line. Refer to
TM 10-3510-209-10.
WARNING
Components of the extractor are
heavy and may be awkward to
handle.
Use
correct
lifting
procedures, lifting devices, and/or
assistance from other personnel to
avoid injury.
c.
Refer to paragraph 3-16, REPAIR, step 1,
and remove extractor basket.
d.
Refer to paragraph 3-16, REPAIR, step 1,
and remove curb from base.
e.
Tag and disconnect two brake solenoid
electrical wires (1) from brake solenoid
(2).
f.
Refer to paragraph 2-28 and disconnect
drivebelt.
NOTE
Matchmark the positions of base (13),
trunnion ring (8), and drive unit (7) in
relation to each other as an aid for
assembly.
NOTE
If flat washers are found under
trunnion caps, mark location and
number as an aid for assembly.
3-70
