TM 10-3510-209-24
3-16. EXTRACTOR ASSEMBLY (CONT)
INSTALLATION
WARNING
Components of the extractor are
heavy and may be awkward to
handle.
Use
correct
lifting
procedures, lifting devices, and/or
assistance from other personnel to
avoid injury.
1.
Use lifting straps and hoist and place extractor in
position on trailer.
2.
Install four capscrews (14), lockwashers (15),
and flat washers (16) in large legs (17).
3.
Install five capscrews (10), lockwashers (11),
and flat washers (12) in small legs (13).
4.
Install conduit and three wires (6) in electrical
box (5). Secure with nuts (9).
5.
Connect three wires (6) to circuit breaker (7) and
one green wire to ground screw (8). Remove
tags.
6.
Install cover (4) and two screws (3) on electrical
box (5).
7.
Refer to REMOVAL, step 1, and connect drain
hose to quick disconnect fitting.
NOTE
FOLLOW-ON MAINTENANCE:
Install
tarp
assembly
(TM 10-3510-209-10).
3-68
