TM 10-3510-220-24
2-40. WATER MANIFOLD ASSEMBLY (CONT)
DISASSEMBLY
1. Loosen clamps (21) and remove coupling (23), hose (21), hose barb (20), elbow (19), bushing
(17), nipple (18) and clamp (21).
2. Disconnect hose (11) and remove gaskets (10), hose fitting (12) and reducer (13) from tee (14).
3. Remove tee (14) from nipple (6).
4. Loosen four nuts (7) and remove lockwashers (8) and two clamp assemblies (9).
5. Remove air actuated ball valve assembly (16), elbows (5) and nipple (6) as an entire assembly
by unscrewing from nipple (32).
6. Remove nipple (32), coupling (29), street elbow (28), bushing (27) and nipple (30) from tee (31).
7. Remove tee (31) and remove close nipple (33) from air actuated ball valve assembly (34).
8. Remove coupling (4), bushing (3), nipple (2) and elbow (1) from nipple (36).
9. To remove nipple (6 or 36) from the air actuated ball valve assembly (16 or 34), perform the
following steps.
2-138
