TM 10-3510-220-24
2-44. DRYER TUMBLER ASSEMBLY (CONT)
SERVICE (Cont)
4. Shutdown dryer after use.
ADJUSTMENT
1. Adjust door interlock safety switch.
NOTE
The door interlock safetys witch is adjusted so
that when the door is closed and secured, the
cam on the door hinge presses the button on the
switch. When the door is opened, the button
should be released.
a. Close and secure dryer door (4).
b.
Loosen setscrew (5) on safety switch cam (6).
CAUTION
Do not force the cam into position with the safety
switch.
c. Turn switch cam (6) until it is directly
centered on or directly in front of button (7)
on safety switch (8).
d. If switch cam (6) cannot be centered on
button (7), perform step f; then repeat step c.
e. Tighten setscrew (5).
f. Loosen three screws (9) on door switch
mounting plate (10).
g.
h .
i.
Position the switch (8) so that switch cam
(6) presses button (7). If the switch cannot
be positioned so that the cam presses the
button, perform steps h and i.
CAUTION
Extending the cam unnecessarily can damage the safety switch.
Adjust cam bolt (11) until safety switch button (7) is pressed.
Tighten three screws (9) on door switch mounting plate (10).
2-151
