TM 10-3510-220-24
2-44. DRYER TUMBLER ASSEMBLY (CONT)
ADJUSTMENT (Cont)
NOTE:
l.
m.
n.
o.
p.
(3) Tighten two setscrews (26) at the base of each electrode (27).
Install burner base (25) in plenum (24) and secure with three screws (39) and lockwashers
(40). Install wire protectors (36).
Connect two electrical wires (31) with nuts (32). Push transformer end of wires into position.
Remove tags.
Install burner cover (34) on burner base (25) and secure with six screws (36) and lockwashers
(37).
Install sight glass (33) on burner cover (34) and install cable (35) on UV scanner (30). Install
fuel line (29) on elbow (28).
Open the fuel shutoff valve.
2 - 1 5 5