TM 10-3510-220-24
2-44. DRYER TUMBLER ASSEMBLY (CONT)
REPAIR
NOTE
Refer to paragraphs 2-45 thru 2-52 for repair of
individual dryer components.
1.
Repair door interlock safety switch.
WARNING
High voltage is present on this equipment. Do not
perform maintenance with power on. Death or serious
injury may result.
a .
Remove electrical power from the
dryer.
b.
c.
d .
e.
f.
g .
h.
i.
j .
Remove four screws (41) and remove
cover (42) from safety switch (45).
Tag and disconnect electrical wires
(47) from safety switch (45).
Remove nut (48) and conduit connector
(46) from safety switch (45).
Remove three locknuts (43) and safety switch (45) from mounting plate (44).
Remove four screws (41) and remove cover (42) from new safety switch (45).
Install wires (47) and conduit connector (46) into housing of safety switch (45).
Secure conduit (49) to conduit connector (46) using nut (48).
Secure safety switch (45) to mounting plate (44) with three locknuts (43).
Connect electrical wires (47) to safety switch (45) and remove tags.
