TM 10-3510-220-24
2-50. DRYER TUMBLER DRIVE MOTOR AND GEARBOX ASSEMBLY
This task covers:
a. Service
b. Adjustment
INITIAL SETUP:
Tools
Equipment Condition:
General mechanic’s tool kit
TM 10-3510-220-10, Tarp assembly removed.
General Safety Instructions
Materials/Parts
WARNING
Lubricating oil (Item 17, App C)
Lubricating oil, multipurpose
High voltage is present on this equipment. Do
(Item 18, App C)
not perform maintenance with power on. Death
or serious injury may result.
SERVICE
NOTE
See LO 10-3510-220-12 for lubrication instructions.
1.
Lubricate dryer gear.
WARNING
a.
b.
c.
d .
e.
f.
g.
h.
High voltage is present on this equipment. Do not perform maintenance
with power on. Death or serious injury may result.
Disconnect electrical power from dryer.
Remove three screws (1) and drive chain guard (2).
Position a container under drain plug (3) on the bottom side of gear reduction unit (4).
Remove drain plug (3) from gear reduction unit (4).
Remove filler plug (5) from top front of gear reduction unit (4).
Remove level plug (6) from gear reduction unit (4).
Clean drain plug (3).
After all oil is drained from gear reduction unit (4), install drain plug (3) in bottom of unit.
2-177
