TM 10-3510-220-24
2-51. DRYER BURNER ASSEMBLY (CONT)
REMOVAL (Cont)
3.
4.
5.
6.
7.
8.
9.
Remove fuel line (25) from elbow (24).
WARNING
Allow burner area to cool before any
maintenance actions are performed on the
burner assembly.
Remove UV scanner cable (14) from UV
scanner tube (11). Remove sight glass (15).
Remove six screws (19) and washers (20)
from burner cover (16).
Remove burner cover (16) from burner base
(5) and remove sight glass tube (18).
Remove two nuts (13) and electrical wires
(12) from base of electrodes (10).
CAUTION
Remove the burner base from the plenum
carefully so that the porcelain base and metal
tips of the electrodes are not damaged.
Remove conduit nuts (17).
Remove three screws (21), washers (22), and
burner base (5) from plenum (4).
10. Loosen two setscrews (9) at the base of each
electrode (10).
11. Remove locknuts (6) and remove two
electrodes (10) from burner base (5).
12. Remove fuel nozzle (7) from adapter (8).
2-180
