TM 10-3510-220-24
2-49.
DRYER AIR SHUTTER ASSEMBLY
This task covers:
a. Removal
b . Repair
c. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit
Equipment Condition:
TM 10-3510-220-10, Tarp assembly removed.
Paragraph 2-46 dryer fuel pump assembly
removed.
Materials/Parts
General Safety Instructions
Air shutter assembly 6-2-2376
(81337)
WARNING
High voltage is present on this equipment. Do not
perform maintenance with power on. Death or
serious injury may result.
WARNING
High voltage is present on this equipment. Do not perform maintenance
with power on. Death or serious injury may result.
REMOVAL
1.
2.
3.
4.
5.
6.
7.
Remove thumbscrew (1), nut (2) and shutter (3) with filter screen (7) from air intake
housing (6).
Remove four capscrews (4), lockwashers (5), and air intake housing (6) from blower housing
(17).
Loosen clamp (20) and remove eight fan capscrews (10), lockwashers (11), and blower housing
(17) from flange (12).
Loosen setscrew (18) and remove coupling (19) from shaft of motor (8).
Loosen setscrew (16) and remove blower impeller (15) from shaft of motor (8).
Remove key (9) from shaft of motor (8).
Remove four capscrews (14), lockwashers (13), flange (12) and gasket (21) from motor (8).
2-175
