TM 10-3510-220-24
3-10. WASHER ASSEMBLY (CONT)
DISASSEMBLY
1.
Remove drive motor.
NOTE
To remove belt cover and electrical connections
refer to Removal, Steps 3 & 4.
a.
b.
c.
d.
e.
Loosen four adjusting nuts (24) on the sides
of motor mounting bracket (25) and
release tension on drive belt (27).
Remove four bolts (26), lockwashers (23),
and nuts (22).
Remove drive belt (27) from sheave and
bushing assembly (20) and remove motor (21)
from mounting bracket (25).
Remove three bolts (28), lockwashers (29),
sheave and bushing assembly (20) and
key (19) from motor (21).
Remove drive belt (27) from gear reducer
sheave.
2.
Remove washer cylinder.
CAUTION
Support drum head (34) while removing draw-
bands (32).
a.
Remove the two socket head cap screws (30)
and nuts (31) from the drawband (32) around
the front of the machine while supporting the
drum front head (34) and door assemblies.
b.
Remove drawbands (32) and gasket (33).
c.
Remove drum front head (34).
3-19
