TM 10-3510-220-24
3-10. WASHER ASSEMBLY (CONT)
ASSEMBLY (Cont)
e.
Position retaining ring (63) in place and secure with eighteen acorn nuts (61) and 36
washers (62).
f.
Position door gasket (60) in place and install drawband (59) over door gasket (60) and
secure with screw (58) and nut (57).
g.
Position hinge (55) in place and install four hex head cap screws (53) and washers (54)
securing hinge (55) to door frame.
h.
position door (56) in place and slide hinge pin (52) thru hinge (55) and door (56).
i.
Install set collar (51) on hinge pin (52) and tighten setscrew (50).
3-24
