TM 10-3510-220-24
3-10. WASHER ASSEMBLY (CONT)
DISASSEMBLY (Cont)
4.
Remove shaft seal.
a.
Remove washer cylinder, see paragraph 2.
b.
Remove six nuts (71) and washers (72) holding seal carrier (68) to back of drum (67)
(between gear reducer and drum).
c.
Using pointed tool, separate seal carrier (68) from drum (67).
d.
Clean silicone sealant from back of drum (67) and seal carrier (68).
e.
Remove old seals (69) from seal carrier (68) and clean seal carrier.
3-22
