TM 10-3510-220-24
3-15. EXTRACTOR ASSEMBLY (CONT)
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
WARNING
Components of the extractor are heavy and
may be awkward to handle. Use correct
lifting procedures, lifting devices, and/or
assistance from other personnel to avoid
injury.
Use lifting straps and hoist and place
extractor in position on trailer.
Install four capscrews (17), flat washers
(18) and (20), lockwashers (21), and nuts
(22) in large legs (19).
Install five capscrews (11), flat washers
(12) and (14), lockwashers (15), and nuts
(16) in small legs (13).
Install conduit and three wires (6) in
electrical box (3). Secure with nuts (9).
Connect three wires (6) to circuit breaker
(4) and one green wire to ground screw
(10). Remove tags.
Install cover (7) and two screws (8) on
electrical box (3).
Refer to REMOVAL, step 1, and connect
drain hose to quick disconnect fitting.
Perform follow-on installation.
Install tarp assembly (TM 10-3510-
220-10).
Install strut assembly (TM 10-3510-
220-10).
Install left beam assembly (TM 10-3510-
220-10).
Install pre-extraction bin (para 2-28).
3-64
