TM 10-3510-220-24
3-16. EXTRACTOR DRIVE UNIT
REMOVAL (Cont)
b.
Disconnect extractor drain line.
Refer to TM 10-3510-220-10.
WARNING
Components of the extractor are heavy and
may be awk ward to handle. Use correct
lifting procedures, lifting devices, and/or
assistance from other personnel to avoid
injury.
c.
Refer to paragraph 3-15, REPAIR,
step 1, and remove extractor basket.
d.
Refer to paragraph 3-15, REPAIR,
step 1, and remove curb from base.
e.
Tag and disconnect two brake
solenoid electrical wires (1) from
brake solenoid (2).
f.
Refer to paragraph 2-29 and
disconnect drivebelt.
NOTE
Matchmark the positions of base (13),
trunnion ring (8), and drive unit (7) in
relation to each other as an aid for
assembly.
NOTE
If flatwashers are found under trunnion
caps, mark location and number as an aid
for assembly.
3-66
