TM 10--3510--221--10
0018 00--1
WASHING/DRYING SYSTEM TROUBLESHOOTING
0018 00
THIS WORK PACKAGE COVERS:
Troubleshooting Observed or Displayed Faults on Washing/Drying System
INITIAL SETUP:
Maintenance Level
Materials/Parts
Operator
AMBIENT TEMPERATURE HI OR LO
1.
Obtain ambient temperature.
Is temperature between 33 and 120 degrees F?
YES Notify maintenance.
NO Operate LADS only at ambient temperatures between 33 and 120 degrees F.
DETERGENT SUPPLY A OR B NO FLOW
NOTE
When operating at temperatures below 33 degrees F, detergent may freeze resulting in
blockage in supply tubing.
1.
Check detergent supply container.
Is detergent container empty?
YES Replenish detergent supply (WP 0009 00). Return to normal operation.
NO Go to step 2.
2.
Check pickup tube inserted into detergent container.
Is tube inserted far enough into detergent container?
YES Go to step 3.
NO Properly insert pickup tube. Return to normal operation.
3.
Check entire length of detergent tube for kinks or blockage.
Is tube kinked?
YES Remove kink(s) or blockage from tube. Return to normal operation.
NO Continue laundry cycle(s) adding detergent through sluice on front of drum (WP 0013 00). When
laundry cycles are complete notify maintenance.
