TM 10--3510--221--10
0018 00--3
WASHING/DRYING SYSTEM TROUBLESHOOTING --
Continued
0018 00
DRUM A or B WILL NOT BALANCE or SHAKING EXCESSIVELY
1.
Use MENU SELECTION switch (WP 0008 00, Figure 2, 7) to select PAUSE.
2.
Unlock and open drum door.
NOTE
If laundry load exceeds 200 lbs drum will not balance properly.
3.
Check for excessive load.
Was too much laundry loaded?
YES Remove excess load. Go to step 5.
NO Go to step 4.
4.
Check for laundry bags twisted into large groups.
Were laundry bags twisted together?
YES Untwist bags. Go to step 5.
NO Notify maintenance.
5.
Close and lock drum door.
6.
Use MENU SELECTION switch (7) to select COMPLETE CYCLE.
Does laundry cycle finish without any shaking or balancing problems?
YES Return to normal operation.
NO Notify maintenance.
DRUM DOOR A or B NOT LOCKED OR OPEN
1.
Check position of drum door and handle.
Is drum door closed and handle engaged?
YES Go to step 2.
NO Close door and engage handle. Return to normal operation.
2.
Move handle back and forth slightly and listen for lock to extend.
Does lock extend when handle is moved?
YES Return to normal operation.
NO Notify maintenance.
