TM 10--3510--221--24
0120 00--1
BRAKE PAD REPLACEMENT
0120 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Brake Cleaner (Item 1, WP 0271 00)
Rag, Wiping (Item 4, WP 0271 00)
Washer, Lock (Item 29, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
Air pressure must be vented (WP 0113 00).
REMOVAL
1. Remove four screws (1) and lock washers (2) securing brake guard (3) to bearing plate (4).
2. Lift and remove brake guard (3).
3. Remove brake pads (5) as follows:
a. Straighten bottom tab (6). then slide brake pad (5) out from between brake caliper (7) and brake rotor (8).
b. Straighten top tab (9). then slide brake pad (5) out from between brake caliper (7) and brake rotor (8).
c. Repeat steps a and b for other brake pad (5).
4. Use brake cleaner and a clean rag to clean brake rotor (8).
5. Inspect brake rotor (8). Replace if cracks or scouring are found (WP 0261 00).
