TM 10--3510--221--24
0121 00--1
BRAKE THRUSTER REPLACEMENT
0121 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tape, Anti--Seizing (Item 10, WP 0271 00)
Washer, Lock (Item 29, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
Air pressure must be vented (WP 0113 00).
REMOVAL
1. Remove four screws (1) and lock washers (2) securing brake guard (3) to bearing plate (4).
2. Disconnect air line (5) from brake thruster (6).
3. Remove two jam nuts ( 7) then pull brake thruster (6) out of brake caliper (8).
4. Unthread hex bushing (9) with attached elbow (10) from brake thruster (6).
5. Clean anti--seizing tape from threads of hex bushing (9).
