TM 10--3510--221--24
0121 00--2
BRAKE THRUSTER REPLACEMENT -- Continued
0121 00
1
2
3
7
8
6
9
10
5
4
INSTALLATION
1. Apply anti--seizing tape to threads of hex bushing (9).
2. Thread hex bushing (9) with attached elbow (10) into brake thruster (6).
3. Insert brake thruster (6) into brake caliper (8) then secure by installing two jam nuts (7) hand tight.
4. Position brake thruster (6) with hex bushing (9) on bottom then tighten two jam nuts (7).
5. Connect air line (5) to brake thruster (6).
6. Position brake guard (3) onto bearing plate (4) then secure with four screws (1) and lock washers (2).
7. Use maintenance menu to test drum rotation (WP 0010 00). Ensure drum rotates freely and smoothly.
8. Use maintenance menu to test drum braking (WP 0010 00). Ensure drum stops when brake is applied.
END OF WORK PACKAGE