TM 10--3510--221--24
0149 00--1
STEAM EDUCTOR REPLACEMENT
0149 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Sealant, Pipe Thread (Item 6, WP 0271 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
1. Open petcock (1). Allow water to drain from water pump (2) then close petcock.
2. Disconnect piping (3) at unions (4) and (5).
3. Loosen clamp (6) then disconnect steam hose (7).
4. Unthread barb fitting (8) from elbow (9),
5. Unthread elbow (9) from steam eductor (10).
6. Remove screw (11), flat washers (12), and nut (13), then remove clamp (14) from steam eductor (10) and
mounting bracket (15).
7. Unthread steam eductor (10) from piping (16).
8. Unthread union (5) from steam eductor (10).
9. Clean pipe thread sealant from threads of unions (4 and 5), barb fitting (8) and piping (3 and16).