TM 10--3510--221--24
0185 00--1
FLAME PROGRAMMER REPLACEMENT
0185 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
1. Loosen four latches (1), then open door (2) on heater enclosure (3).
2. Remove display module (4) from flame programmer (5).
3. Loosen two captive screws (6), then remove flame programmer (5) from sub--base (7).
4. Remove flame detector amplifier (8) from flame programmer (5).
5. Pull purge card (9) out of flame programmer (5).