TM 10--3510--221--24
0183 00--1/2 blank
FUEL PRIMING SWITCH REPLACEMENT
0183 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tags (Item 9, WP 0271 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
1. Remove two screws (1) then remove cover (2) and gasket (3) from junction box (4).
2. Tag and disconnect wiring from switch (5).
3. Remove nut (6) and lock washer (7) then pull switch (5) ) out of cover (2).
6
7
1
2
3
4
5
INSTALLATION
1. Insert new switch (5) into cover (2) then secure with nut (6) and lock washer (7).
2. Connect wiring to switch (5) as tagged.
3. Install cover (2) and gasket (3) onto junction box (4) then secure with two screws (1).
4. Perform fuel pump priming procedures (TM 10--3510--221--10).
END OF WORK PACKAGE
