TM 10--3510--221--24
0185 00--2
FLAME PROGRAMMER REPLACEMENT -- Continued
0185 00
7
6
9
4
5
8
1
3
2
INSTALLATION
1. Insert purge card (9) into flame programmer (5).
2. Insert flame detector amplifier (8) onto flame programmer (5).
3. Install flame programmer (5) onto sub--base (7) and secure with two captive screws (6).
4. Install display module (4) onto flame programmer (5).
5. Close door (2) and secure to heater enclosure (3) by tightening four latches (1).
6. Use maintenance menu to test heating system (WP 0010 00).
END OF WORK PACKAGE