TM 10--3510--221--24
0182 00--3/4 blank
BURNER ASSEMBLY REPLACEMENT -- Continued
0182 00
INSTALLATION
1. Position burner assembly (20) on combustion chamber (21).
2. Secure burner assembly (20) to combustion chamber (21) with four screws (17), lock washers (18), and flat
washers (19).
3. Connect fuel tube (15) to fuel pipe (16).
4. Wipe soot from lens (22) of flame detector (13) with a soft clean wiping rag.
5. Position flame detector (13) on sight tube (14), then tighten captive nut (12).
6. Connect ignition wires (10) to electrodes (11).
7. Securing heater enclosure (8) to heater frame (9) with four screws (5), lock washers (6), and flat washers (7).
8. Connect air tubes (1 and 2) to air tubes (3 and 4).
9. Use maintenance menu to test heating system (WP 0010 00). While heating system is operating visually
check for fuel leaks.
END OF WORK PACKAGE