TM 10--3510--221--24
0256 00--3/4 blank
TARP REPLACEMENT -- Continued
0256 00
INSTALLATION
1. Place new tarp (1) over LADS.
2. Align holes in tarp (1) with mounting holes in front support (14).
3. Position center retaining plate (9) on tarp (1) then secure to front support (14) with three screws (6), flat
washers (7), and nuts (8).
4. Position outer retaining plates (5) on tarp (1) then secure to front support (14) with four screws (2), flat washers
(3), and nuts (4).
5. Flip back half of tarp (1) back over front of LADS to expose awning extension (10).
6. Lay awning extension (10) over top front section of LADS.
7. Install and tighten six straps (11) to secure awning extension (10) to tarp supports (12) and ISO frame (13).
8. Determine required configuration of LADS. If LADS is to be returned to operation proceed to step 10. If LADS
is to be returned to transport configuration continue to step 9.
9. Stow railing, raise platform, and secure tarp (TM 10--3510--221--10, PREPARATION FOR MOVEMENT
procedures steps J10 and J11, K, and L ).
10. Set--up awning supports and awning (TM 10--3510--221--10, ASSEMBLY AND PREPARATION FOR USE
procedures steps D3 through D11)
END OF WORK PACKAGE
