TM 10-3510-222-10
Table 3-1. Troubleshooting - continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
11.
WASHER FAILS TO FILL WITH WATER IN MANUAL - continued.
Step 4.
Check DRAIN switch position.
a.
Set MASTER switch to OFF.
b.
Set DRAIN switch to CLOSED.
c.
Set MASTER switch to ON.
d.
If washer fails to fill with water in manual, set MASTER switch to OFF and notify unit
maintenance.
12.
WASHER FAILS TO DRAIN.
Step 1.
Check nonmetallic drain hose for clogged condition.
a.
Set MASTER switch to OFF.
b.
Disconnect nonmetallic drain hose.
c.
Check nonmetallic drain hose for clog.
d.
Connect nonmetallic drain hose.
e.
Set MASTER switch to ON.
Step 2.
Check manual DRAIN switch for setting.
a.
Set AUTO/MANUAL switch to MANUAL.
b.
Set DRAIN switch to OPEN.
c.
If washer fails to drain, set MASTER switch to OFF and notify unit maintenance.
3-12
