TM 10-3510-222-10
Table 3-1. Troubleshooting - continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
WASHER FAILS TO START IN AUTOMATIC - continued.
d.
Re-insert washer formula card into cycle timer from the right side. Line up with start marker and
washer formula card first cutout.
e.
Turn RUN/STOP knob to RUN.
f.
Set MASTER switch to ON.
g.
If washer fails to start, set MASTER switch to OFF and notify unit maintenance.
9.
WASHER FAILS TO START IN MANUAL.
Step 1.
Check for electrical power.
a.
Set MASTER switch to OFF.
b.
Open power distribution panel and see if number 6 washer circuit breaker has tripped. If tripped,
reset circuit breaker.
c.
Close power distribution panel.
d.
Set MASTER switch to ON.
Step 2.
Check door handle position.
a.
Set MASTER switch to OFF.
b.
Close door and rotate handle.
c.
Set MASTER switch to ON.
Step 3.
Check AUTO/MANUAL switch position on washer control panel.
a.
Set MASTER switch to OFF.
b.
Set AUTO/MANUAL switch to MANUAL.
c.
Set MASTER switch to ON.
3-9
