TM 10-3510-222-10
Table 3-1. Troubleshooting- continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
WASHER FAILS TO START IN AUTOMATIC.
Step 1.
Check for electrical power.
a.
Set MASTER switch to OFF.
b.
Open power distribution panel and see if number 6 washer circuit breaker has tripped. If tripped,
reset circuit breaker.
c.
Close power distribution panel.
d.
Set MASTER switch to ON.
Step 2.
Check door handle position.
a.
Set MASTER switch to OFF.
b.
Close door and rotate handle.
c.
Set MASTER switch to ON.
Step 3.
Check AUTO/MANUAL switch position on washer control panel.
a.
Set MASTER switch to OFF.
b.
Set AUTO/MANUAL switch to AUTO.
c.
Set MASTER switch to ON.
Step 4.
Check formula card RUN/STOP motor switch for correct position.
a.
Set MASTER switch to OFF.
b.
Set RUN/STOP motor switch to STOP.
c.
Remove formula card from left side.
3-8
