TM 10-3510-222-24
2-30. MOTOR AND PLATE.
This task covers:
a. Removal
b. Installation
c. Adjustment
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials/Parts
Tags (App D, Item 4)
Closed End Connector (App C, Item 4)
Equipment Condition
Belt guard removed (Para 2-29)
a. REMOVAL
(1) AC Motor (8).
(a) Loosen four nuts (1) on screws (2).
(b) Back off four nuts (3) on screws (2) enough to remove V-belt (4).
(c) Remove V-belt (4) from pulley (5).
(d) Remove four screws (6), and cover (7) from ac motor (8).
(e) Tag and remove electrical wiring from ac motor (8) and remove conduit (9) with wiring.
(f) Remove four nuts (10), lockwashers (11) and bolts (12) from ac motor (8) and plate (13).
(g) Remove ac motor (8) from plate (13).
(h) Measure distance between pulley (5) and ac motor (8) and record distance.
(i) Remove two bolts (14) and bushing (15).
(j) Remove pulley (5) and key (16) from ac motor (8).
(k) Position cover (7) on ac motor (8) and install four screws (6).
(1) Remove four nuts (1) and plate (13) from screws (2).
(2) V-belt (4).
(a) Loosen four nuts (1) from screws (2).
(b) Turn four nuts (3) to lower plate (13) until V-belt (4) can be removed.
(c) Remove V-belt (4) from pulleys (5 and 17).
2-78
