TM 10-3510-222-24
3-24. REDUCER AND OUTPUT QUILL - continued.
(2) Assembly
NOTE
If replacing bearing cups, cones and/or gears, replace as an assembly.
(a)
Install cups (44, 45 and 54) on cover (52).
(b)
Install cups (42, 51 and 58) on cover (60).
(c)
Install gears as assembly C.
(1)
Install key (40) on output quill (39).
(2)
Install gear (38).
(3)
Install cone (37).
(4) . Install cone (41).
(d)
Install gears as assembly B.
(1)
Install key (49) on gear (48).
(2)
Install gear (47).
(3)
Install cone (46).
(4)
Install cone (50).
(e) Install gears as assembly A.
(1)
Install cone (55) on pinion (56).
(2)
Install cone (57).
(f)
Install shim (36) as required.
(g)
Install four bolts (34) on cover (35).
(h)
Install shims (27) as required.
(i)
Install four bolts (30) on cover (28).
(j)
Install shims (33) as required.
(k)
Install four bolts (31) on cover (32).
3-46
