TM 10-3510-222-24
3-24. REDUCER AND OUTPUT QUILL - continued.
WARNING
Compressed air will not exceed 30 psi (207 KPa). Use personnel protection equipment. Failure to
comply could result in injury to personnel.
Clean all parts in drycleaning solvent and use compressed air or a cleaning cloth to dry parts.
d.
INSPECTION
Inspect all parts for damage or wear.
e.
REPAIR
Repair consists of replacing damaged components of the gear reducer and output quill.
(1) Disassembly
(a)
Remove four bolts (31) from cover (32) and remove cover.
(b)
Remove shims (33) as required.
(c)
Remove four bolts (30) from cover (28) and remove cover.
(d)
Remove shims (27) as required.
e)
Remove four bolts (34) from cover (35) and remove cover.
(f)
Remove shim (36) as required.
(g)
Remove gears as assembly A.
(1)
Remove cone (55).
(2)
Remove pinion (56).
(3)
Remove cone (57).
(h) Remove gears as assembly B.
(1)
Remove cone (46).
(2)
Remove gear (47).
(3)
Remove cone (50).
(4)
Remove key (49) from gear (48).
(i) Remove gears as assembly C.
(1)
Remove cone (37).
(2)
Remove gear (38).
(3)
Remove cone (41).
(4)
Remove key (40) from output quill (39).
(j)
Remove cups (42, 51 and 58) from cover (60).
(k)
Remove cups (44, 45 and 54) from cover (52).
3-45
