TM 10-3510-222-24
3-33. COMPRESSOR AND MOTOR.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials/Parts
Tags (App D, Item 4)
Antiseize Tape (App D, Item 17)
Equipment Condition
Air compressor removed (Para 2-34)
a. REMOVAL
(1) Loosen captive nut (1) and remove cover (2).
(2) Loosen nuts (6 and 8) on tube and remove tube (7).
(3) Remove elbow (10).
(4) Remove adapter (12) from tee (13).
(5) Remove check valve (14).
(6) Remove check valve (14) from tee (13).
(7) Remove nut (3) and pressure switch (4) from compressor and motor (5).
b. REPAIR
Repair consists of replacing damaged or missing components of the compressor and motor.
c. INSTALLATION
NOTE
Apply antiseize compound to all male threads before installing hardware.
(1) Position pressure switch (4) on compressor and motor (5) and install nut (3).
(2) Position cover (2) on pressure switch (4) and tighten captive nut (1).
(3) Install elbow (10).
(4) Install check valve (14) on tee (13).
(5) Install check valve (14) on compressor and motor (5).
(6) Install adapter (12).
(7) Install two inserts (9) on tubing (7) if tubing was replaced.
(8) Install tubing (7) and tighten nuts (6 and 8).
(9) Install air compressor and do adjustment (Para 2-34).
Change 1
3-78
