TM 10-3510-222-24
3-32. CHASSIS CONTROL- continued.
(2) Fuse (14).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Remove fuse(s) (14) from fuse block (15).
(c) Install new fuse(s) (14) on fuse block (15).
(d) Position cover (4) on control console (8) and install twelve screws (3).
(3) Transformer (16).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Tag and remove electrical wiring to transformer (16).
(c) Remove transformer (16).
(d) Install new transformer (16).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible
(e) Connect electrical wiring to transformer (16).
(f)
Position cover (4) on control console (8) and install twelve screws (3).
(4) Junction Box (22).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Remove screw (17) and plate (18).
(c) Remove two screws (19).
(d) Tag and remove electrical wiring to connector (20).
(e) Remove two screws (21) and junction box (22).
(f)
Remove bushing (23) from junction box (22).
(g) Install bushing (23) on new junction box (22).
(h) Position junction box (22) on chassis control (9) and install two screws (21).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible
(i)
Connect electrical wiring to connector (20).
(j)
Install two screws (19).
(k) Position plate (18) on junction box (22) and install screw (17).
(l)
Position cover (4) on control console (8) and install twelve screws (3).
3-75
